1000A/2000A High Current Generator Power Maintenance Equipment Product Introduction
Darui Electric recommends
It is a low-voltage, high-current dry-type transformer. Suitable for frequency 50HZ switches, current transformers or other electrical equipment for current boosting and load testing. The product adopts integrated and split structures, making operation and data reading more convenient. It is essential equipment for places requiring high current in electrical debugging across various industries.
1000A/2000A High Current Generator - Power Maintenance Equipment Usage Method:
1. The instrument must have good grounding. 2. Connect the power supply, turn on the switch, the red indicator light will be on, at this time the current booster is waiting to boost current.
3. Rotate the voltage regulator evenly clockwise, pay attention to the output current indicator on the operation console until the required high current is reached.
4. During the test, once any abnormal phenomenon is found, immediately cut off the power supply, find out the cause before conducting the test again.
5. After the test, the voltage regulator must be returned to zero, cut off the power supply by the air switch, cut off the working power, and remove the test wiring in the reverse direction to ensure safety.
Product Parameter Table:
Note: "Booster opening voltage", "Single-phase or three-phase", "Working time" can all be customized
|
Model |
Output Capacity (kVA) |
Output Current (A) |
Power Supply Voltage (V) |
Opening Voltage (V) |
Power Supply Phase Number |
Remarks |
|
|
500 A |
3 |
500 |
220 |
6 |
1 |
|
Integrated (box or cabinet type) |
|
1000 A |
6 |
1000 |
220 |
6 |
1 |
|
Integrated (box or cabinet type) |
|
1500 A |
9 |
1500 |
220 |
6 |
1 |
|
Integrated |
|
2000 A |
12 |
2000 |
220 or 380 |
6 |
1 |
2 |
Integrated or split type |
|
2500 A |
15 |
2500 |
380 |
6 |
1 |
2 |
Integrated or split type |
|
3000 A |
18 |
3000 |
380 |
6 |
|
2 |
Integrated or split type |
|
4000 A |
24 |
4000 |
380 |
6 |
|
2 |
Split type |
|
5000 A |
30 |
5000 |
380 |
6 |
|
2 |
Split type |
|
6000 A |
36 |
6000 |
380 |
6 |
|
2 |
Split type |
|
8000 A |
48 |
8000 |
380 |
6 |
|
2 |
Split type |
|
10000 A |
60 |
10000 |
380 |
6 |
|
2 |
Split type |
|
12000 A |
72 |
12000 |
380 |
6 |
|
2 |
Split type |
|
15000 A |
90 |
15000 |
380 |
6 |
|
2 |
Split type |
Product Structure
It is a movable structure, composed of an instrument indicator light panel and an operation panel. The instrument indicator light panel has two ammeters for large and small ranges and a selector switch (toggle switch) for large and small ranges. The green indicator light refers to the power signal, and the red indicator light refers to the working signal. The operation panel consists of a start button (green), a stop button (red), and the working system.
The high current generator adopts a primary terminal input method. At the lower end, there are secondary output high current terminals of the current booster (with door-open wiring type and door-closed wiring type).
Aliases
Current booster, intelligent high current generator, programmable high current generator, portable multifunctional high current generator
Operating Environment
1. Working power supply: 220V or 380V ±10% 50HZ
2. Ambient temperature: —10℃—40℃
3. The product should be placed in an environment free of gases, vapors, chemical dust deposits, dirt, and other explosive media that seriously affect transformer insulation.
Equipment Completeness
1. Current booster main unit One set
2. Product certificate One copy
3. Product instruction manual One copy
Note: The above information and technical parameters are compiled and released by Yangzhou Darui Electric Co., Ltd.
