Darui Electric recommends for you
1. High current output terminal
2. Power indicator signal light
3. Power input terminal: AC: 220V power input here.
4. Ground terminal, for safety, this terminal should be grounded.
5. 4 1/2 LCD digital display ammeter.
6. Current output button, press this button, high current output, output indicator light on.
7. Current cut-off button, press this button, high current cut off, output indicator light off.
8. High current adjustment knob.
◆ Current withstand timing range: 0-9999S
◆ Impact timing range: 0-999mS
◆ Ambient temperature: -20℃ to 50℃
◆ Current accuracy: ≤0.5% (F.S)
Working principle:
1. The instrument must be properly grounded.
2. After connecting the working power, turn on the switch, the red signal light is on, press the start button, the green signal light is on. Connect the output terminal to the test object, then the current generator waits for current generation.
3. Rotate the voltage regulator clockwise evenly, pay attention to the output current indication on the operation console to the required high current.
4. During the test, once abnormal phenomena are found, immediately cut off the power, find out the cause before conducting the test again.
5. After the test, the voltage regulator must be returned to zero, press the stop button to cut off the power, cut off the working power, and then remove the test wiring to ensure safety.
Product completeness
1. Current generator main unit One set
2. Product certificate One copy
3. Product instruction manual One copy
Operating environment
1. Working power: 220V or 380V ±10% 50HZ
2. Ambient temperature: -10℃ to 40℃
Note: The above information and technical parameters are compiled and released by Yangzhou Darui Electric Co., Ltd.
