Introduction
The box-type rain test chamber is mainly used to assess the performance and technical condition of housings and seals of electrical and electronic products after water testing, or to ensure that the equipment and components maintain good working performance during the test. At the same time, products may be affected by water immersion during transportation or use, providing a reference basis for product technical standards. It is applicable to artificial rain tests based on natural conditions, without strong wind-driven rainfall, and does not consider large water ingress caused by temperature differences between the test specimen and rainwater.
Ordering Specifications:
Inner box dimensions: W800×D800×H800mm
Inner box dimensions: W1000×D1000×H1000mm
Main Technical Parameters:
1. Spray hole diameter: φ0.4mm (or φ0.8mm)
2. Spray hole spacing: 50mm
3. Spray ring radius: R400mm
4. Spray pipe diameter: φ16mm
5. Swing pipe swing angle amplitude: 0～±180° adjustable
6. Swing speed adjustment: stepless adjustment
7. Average water flow rate per hole: 0.07L/min (or 0.6L/min)
Main Technical Parameters:
1. Rotating arm length: 500mm
2. Spray pipe diameter: φ15mm
3. Spray hole diameter: φ1.2mm
4. Number of spray holes: 40
5. Spray hole spacing: 12.5mm
6. Spray pipe rotation speed: 23 rpm
7. Rotating pipe angle: 360° rotation
8. Rotating pipe spray water pressure: 290kpa adjustable
9. Rotating pipe water flow rate: 39.2L/min adjustable
Rain Test Chamber Unit Price
Box Structure
1. Both the inner and outer shells of the test chamber are made of SUS304 stainless steel plate. The outer surface is brushed and hairline finished, while the inner shell is made of high-quality stainless steel mirror plate.
2. The spray pipes are also made of stainless steel.
3. The working chamber and all other parts that come into contact with water are made of stainless steel or copper materials.
