Dary Electric recommends for you
● Capacitance range: 0.2μF~2,000μF;
Capacity range: 5~20,000 kvar;
Measurement accuracy: 0.2μF~2μF ±1% reading ±0.02μF;
2μF~2,000μF ±1% reading ±2 digits;
● Inductance range: 1mH~9.99H; Measurement accuracy: ±1.5% reading ±2 digits
● Output measurement voltage: AC 26V/500VA; 50Hz;
● Display mode: Large-screen LCD full Chinese output, TPμp-40 panel-type thermal printer
● Dimensions / Weight: 370×370×220 mm / 16 kg
Working Conditions:
a. Ambient temperature: 0℃ ~ +40℃, relative humidity: ≤90%
b. Power supply: AC 220V±10%; 50Hz;
Product Introduction:
It was specially developed under the guidance of the expert working group of reactive power compensation devices, aiming at solving the problems existing in measuring the capacitance value of capacitors at substation sites. It focuses on solving the following problems:
(1) Measuring capacitors on site requires removing connecting wires, which not only involves heavy workload but also easily damages capacitors;
(2) The low output voltage of capacitance meters leads to low fault detection rate.
This instrument features small measurement workload, fast and simple operation, stable performance, accurate measurement, and high fault detection rate. In addition, its current measurement unit can also be used for measuring electrical equipment such as CVT and lightning arresters, providing multi-functional use in one instrument.
Product Features:
1. Automatic range conversion.
2. Data storage.
3. Large-screen LCD (320×240×LCD) display, Chinese menu operation prompts.
4. Simultaneous display of waveform and measurement processing data on the same screen, making the test process more intuitive;
5. With setting, calibration, and debugging functions.
Keywords: (Three-Phase) Automatic Capacitance and Inductance Tester, (Three-Phase) Automatic Capacitance and Inductance Tester
Note: The above information and technical parameters are compiled and released by Yangzhou Dary Electric Co., Ltd.
