Variable Frequency Series Resonance Circuit Diagram Factory Direct - Yangzhou Darui
Darui Electric recommends for you
Frequency Conversion Series Resonance Test Device
l Output voltage: 1kV/3kV/5kV
l Output current: 6A/2A/1.2A
Performance features l Cooling method: Epoxy resin casting structure, insulation heat resistance class B.
l Electrostatic shielding layers are set between high and low voltage windings and the iron core, serving as both an excitation transformer and an isolation transformer.
Frequency Conversion Series Resonance Test Device
l Rated working current: 1A
l Rated inductance: 146H
l Continuous working time: 30min
l Temperature rise: less than 60 degrees
l Working frequency: 20~300Hz
Performance features l The reactor is designed with an iron core structure, enameled wire winding, dry-type self-cooling. The reactor can be freely and conveniently stacked. The epoxy resin insulating cylinder shell has sufficient electrical and mechanical strength, necessary heat dissipation capacity, and margin for oil thermal expansion and contraction. The reactor shell comes with a base, and the upper end of another reactor is connected. The shell is sprayed with orange insulating paint.
l The reactor shell comes with a base, and the upper end of another reactor is connected using a slot combination for convenient on-site use.
Excitation Transformer
Technical parameters l Rated capacity: 6kVA
l Input voltage: 200V/400V, when input is 400V, connect the low voltage side in series; when input is 200V, connect the low voltage side in parallel.
Note: The above information and technical parameters are compiled and released by Yangzhou Darui Electric Co., Ltd.
